PTA Approved Signal Booster - Buy Hallroad.org.pk
mobile signal booster Online at Best Price in Pakistan
Key Features of a PTA-Approved Signal Booster
A typical PTA-approved signal booster system comprises three main components: an outdoor antenna, an amplifier (or booster unit), and an indoor antenna.
.webp)
Outdoor Antenna: This antenna is installed outside the building or vehicle, in a location where even a weak cellular signal is present. Its primary function is to capture existing weak signals from the nearest cell tower.
Different types of outdoor antennas exist, including directional antennas (like Yagi antennas) that focus reception on a single tower for better results, especially in very weak signal areas. Amplifier/Booster Unit: This is the core of the system. The weak signal captured by the outdoor antenna is transmitted to this unit via a coaxial cable. The amplifier then boosts the signal's strength significantly across multiple frequency bands, potentially supporting 2G, 3G, 4G, and even 5G, depending on the model. Some advanced boosters feature built-in indoor antennas and can be controlled via mobile apps, offering professional signal meter tools for optimal antenna placement.
Indoor Antenna: After amplification, the boosted signal is sent to the indoor antenna, which then rebroadcasts the stronger signal within the desired coverage area (e.g., inside a house, office, or vehicle).
Indoor antennas can be omnidirectional (for general coverage) or panel/dome antennas (for more focused coverage). Coaxial Cables: These high-quality cables connect the outdoor antenna to the amplifier and the amplifier to the indoor antenna, ensuring minimal signal loss during transmission.
Additional Features Often Found:
Multi-band Support: Approved boosters often support multiple frequency bands, ensuring compatibility with various cellular networks and technologies (2G, 3G, 4G, 5G).
Automatic Gain Control (AGC): This feature helps prevent signal overload and interference by automatically adjusting the booster's power output.
LCD Display/Indicators: Many boosters have displays or LED indicators that show signal strength, operational status, and potential error messages, aiding in installation and troubleshooting.
App Control: Some modern boosters offer companion apps that allow users to monitor performance, adjust settings, and get installation assistance from their smartphones.
Easy Installation: Reputable brands design their systems for user-friendly installation, often providing comprehensive manuals.
How to Use/Install a PTA-Approved Signal Booster
Installing a signal booster involves a few crucial steps to ensure optimal performance and avoid interference.
1. Understanding the Components 🧩
Before starting, familiarize yourself with the components: the outdoor antenna, the indoor antenna, the amplifier, and the coaxial cables.
2. Check Mobile Signal Strength (Crucial!) 📶
Identify Weak Signal Areas: The first step is to pinpoint where your signal is weakest and where it's strongest outdoors.
Measure Signal Strength: Use your smartphone's signal strength indicator (often found in "Settings > About Phone > Network/Status" on Android, or field test mode on iPhone by dialing
*3001#12345#*).Signal strength is measured in dBm (decibel-milliwatts). Good Signal: -79 dBm to -65 dBm
Excellent Signal: Over -65 dBm
Weak Signal: -99 dBm to -90 dBm (may break up)
3. Choose Installation Locations 📍
Outdoor Antenna:
Find a location on your roof or an elevated point where the signal is strongest and clearest.
The antenna should ideally be facing the nearest cell tower.
Ensure there are minimal obstructions (buildings, trees, metal objects) between the antenna and the cell tower.
Maintain a minimum separation of 10 meters (around 30 feet) horizontally and vertically between the outdoor and indoor antennas to prevent signal oscillation (feedback).
Indoor Antenna:
Place the indoor antenna in the center of the area where you want to improve signal coverage.
Avoid placing it near large reflective surfaces like windows.
Amplifier Unit:
Choose a location that is away from excessive heat, direct sunlight, and moisture.
Ensure proper ventilation and access to a power outlet (AC 110V-230V).
4. Installation Steps 🛠️
Mount the Outdoor Antenna: Securely mount the outdoor antenna in your chosen location. If using a directional antenna, aim it precisely towards the nearest cell tower.
Run Coaxial Cable (Outdoor): Carefully run the coaxial cable from the outdoor antenna into the building to the location where you plan to place the amplifier unit. Use drip loops to prevent moisture from collecting at connections and seal any entry points into the building with sealant.
Connect Outdoor Antenna to Amplifier: Connect the coaxial cable from the outdoor antenna to the "OUTDOOR" or "BTS" port on the amplifier unit. Ensure the connection is tight and secure.
Connect Indoor Antenna to Amplifier: Run another coaxial cable from the indoor antenna to the "INDOOR" or "MOBILE" port on the amplifier unit. Again, ensure a secure connection.
Power On the System: Once all connections are secure and correct, plug in the power adapter to the amplifier unit and turn it on.
Check for Errors/Adjustments:
Most modern boosters have indicators or an LCD display that will show system status.
Look for any error alerts, such as oscillation (indicated if the outdoor and indoor antennas are too close). If possible, use the booster's signal meter or an app to fine-tune the outdoor antenna's direction for the best possible signal. Rotate the antenna slowly in small increments (e.g., 45 degrees) and re-check the indoor signal until you achieve the strongest reading.
Test the System: Walk around the desired coverage area with your mobile phone and observe the signal strength. You should notice a significant improvement in call quality and data speeds.
5. Maintenance 🧹
Regular Visual Inspection: Periodically check the booster and its components for any visible damage or loose connections.
Clean Antennas: Dust, debris, and environmental factors can affect antenna performance; clean them as needed.
PTA Regulations and Legality in Pakistan ⚖️
It's crucial to understand the legal landscape regarding signal boosters in Pakistan. The Pakistan Telecommunication Authority (PTA) has specific regulations to prevent interference with cellular networks.
Unauthorized Boosters are Illegal: The import, sale, and use of unauthorized (non-type approved) GSM boosters/amplifiers/repeaters are strictly prohibited in Pakistan.
Individuals found violating this rule can face legal action under the Pakistan Telecommunication (Re-organization) Act 1996, which can include imprisonment (up to three years), hefty fines (up to ten million rupees), or both. Interference Concerns: The primary reason for this strict regulation is that substandard or improperly installed boosters can cause significant interference in licensed frequency bands allocated to Cellular Mobile Operators (CMOs). This interference degrades the quality of mobile services for other users in the vicinity, leading to call drops and slow data speeds.
PTA Type Approval: Only Cellular Mobile Operators (CMOs) and PTA Type Approval holders are permitted to import and install GSM boosters at consumer premises. This means that if you purchase a "PTA Approved Signal Booster," it should be from a vendor or through a channel that has received proper type approval from the PTA.
Public Awareness: PTA actively advises the public against purchasing telecom equipment, including signal boosters, without valid permission or Type Approval/Certificate of Compliance (CoC). They also instruct e-commerce platforms to remove listings of illegal devices.
Comments
Post a Comment